Verse Chronicles

Chapter 8 · Player Content

Leveling System

The leveling system provides detailed instructions on how and when characters can level up and how to use the Build Point system. This also explains the type of campaign settings that a Verse Master can use for their leveling system and gives guidelines and instructions on ways to assign experience or milestones. Learn to run a campaign without increasing stats or abilities through leveling, but through attaining new equipment, training, and learning new skills and spells within the world itself.

The Verse Master must decide on a Leveling System that permits the characters to grow and gain new abilities. Within Verse Chronicles there are two traditional systems that the Verse Master can choose from: the Experience Leveling System and the Milestone Leveling System.

Experience Leveling System

As a Character gains experience from combat or exploring they eventually accumulate enough to level up. Whenever a character defeats a creature, they gain Experience (XP) equal to that creature’s Ability Score Average (ASA). For creatures whose ASA is less than 1, they must defeat an amount of creatures whose ASA equals up to 1 ASA. As an example, a creature whose ASA is 1/8 requires to have defeated eight such creatures. If more than one character is battling a creature at a time, they may all receive only a portion of the experience or none if they contributed little to nothing in the combat, this would depend on the Verse Master’s discretion as they may also decide they every Character receives the full amount of experience. For example, if four Characters are fighting a CR 1 creature, they may each only receive 1/4 experience. This system is best designed for Campaign Settings that have a maximum level such as the Leveling to 20 Campaign.

Character LevelEasy Mode XPNormal Mode XPAdept Mode XPHard Mode XP
1----
210183645
33054108135
460108216270
5100180360450
6150270540675
7210378756945
82805041,0081,260
93606481,2961,620
104508101,6202,025
115509901,9802,475
126601,1882,3762,970
137801,4042,8083,510
149101,6383,2764,095
151,0501,8903,7804,725
161,2002,1604,3205,400
171,3602,4484,8966,120
181,5302,7545,5086,885
191,7103,0786,1567,695
201,9003,4206,8408,550

Milestone Leveling System

As the character progresses through a campaign's story and achieves amazing feats or tasks they may pass a Verse master's Milestone Marker. In such a system, experience or levels are granted based off of completing quests or performing extreme or great acts. Character participation may also skew how much experience they receive or whether they level up or not. This system grants the Verse Master complete control over when and how characters can level instead of how many creatures they defeat, traps they disable, or even with the experience they gain from combat. The Milestone System is best for long lasting campaigns that do not have level limitations or campaigns that are heavily driven by story or linear events that a Verse Master has predetermined in order to keep combat steady and fair at all times.

Regardless of the system used every character starts at level 1 (unless that campaign setting states otherwise). The character must use a Rest Spot to level up once either a sufficient amount of Experience (XP) has been gained or whenever the Verse Master decides they have reached a Milestone. In doing so, 6 hours of their day or night must be dedicated to studying and training during the level up process and cannot be interrupted while doing so. Verse Chronicles does not have a maximum amount of levels that a character can reach unless the Verse Master is playing a Campaign Setting that has one and some systems may not have a leveling system at all.

Build Points
Whenever a character levels up they gain Build Points equal to 10 + Character Level. These points can be used to increase Ability Scores, increase Skills or Knowledge or Training, to unlock a new Spell Access Level, to increase the damage Unarmed Dice (UD) or Spell Dice (SD) deals, or to purchase Feats or Spells. All Campaign Settings have difficulty settings that determine how XP a character needs to level up in the Experience Leveling System as well as whether characters have a bonus amount of BP when leveling up. In Easy Mode, the BP has a + 3 bonus, in Normal Mode it is a +2 bonus, in Adept Mode it is a + 1 bonus, and in Hard Mode BP does not have a bonus. Build Points can be applied anytime the character is at a Rest Spot and is dedicated studying, practicing, or training. The Character gains the points at level up or through Intuition Points (see below) but do not have to use the points when leveling and can hold onto them to roll over either at next level or when at a different Rest Spot.
Each Ability Score can have a maximum of 1 build point placed into them at each level and does not roll over. Any points not put into the Ability Score at one level cannot be stacked onto another level. Skills can have a number of build points placed into them equal to the character's level. A level one character can place a maximum of 1 point into each skill then at level two place an additional 2 build points giving them a total of 3 points to the skill. The same is true for Knowledges and Training. Unarmed and Spell Dice have set amounts that must be purchased to increase to the next level and must be purchased a level at a time and cannot be skipped. The same is true for Spell Access Levels. Feats and Spells have set amounts that are used to purchase them and only Spells of the Spell Access Level the character has access to can be purchased and the prerequisites must be met for Feats. Spells and Feats can be learned outside of leveling as well.

Starting at level one and every four levels afterwards, all Characters gain either a Bonus Feat or a Bonus Spell of the players choosing. The Bonus feat can be a General or a Combat Feat and can only be taken if applicable and if the prerequisites are met. The Bonus Spell can be any spell that is applicable and must be one that belongs to the Spell Access Levels that the Character has access to.

Feats and Spells can be learned in numerous ways but they must be trained on while at a Rest Spot. In order to learn a new spell using Build Points, players must spend the amount of points necessary to purchase the spell and spend time studying and training on how to use it and the same is true for Feats. The more feats a Character has through the BP system, the less spells they may have and vice versa as more points are spent on one over the other. This is because learning spells and learning feats both take time and training and therefore the player must choose if their Character takes the time to learn one or the other.

Build Points can also be used to increase Skills, Knowledge, or Training. Each level they can add any available Build Points equal to up to the character’s current level into any Skill, Knowledge, or Training. Additionally, Characters can add Build Points to Ability Scores with a maximum of 1 point per Ability Score each level. Players must be very careful about where they put their points as they only have so many per level. Any unused BP rolls over to the next level to be used but they must only be used while in the leveling process or when using a Rest Spot while uninterrupted.
Points may also be granted by the Verse Master depending on what the character achieves while exploring through the use of Intuition Points. Each time a character uses a Skill or succeeds on a Skill Check they gain one Intuition Point. Once the Character has 10 Intuition Points in one Skill they gain a +1 bonus to it. Also, for each hour a Character spends studying a Knowledge through research either through computers or books, such as at a library, they gain 1 Intuition Point.
However, once an Intuition Point is gained from a single source, such as a specific book or scroll, then that source cannot be used to gain more Intuition Points and new sources must be used that provide new knowledge or information. Once they have 10 Intuition Points in one Knowledge they gain a +1 bonus to it. Finally, whenever a character naturally lands a Critical Hit on a creature with an Attack then they gain Intuition Points for that Training skill and once they have 10 Intuition Points in one Training then they gain a +1 bonus to it.

The last use of Build Points is to grow in power and damage by unlocking new levels in spells and attacks. At level one every character has access to Cantrip Spells and their unarmed attacks deal 1d4 for their UD and spell attacks deal 1d4 for their SD. All of these have a maximum point of leveling up that cannot be exceeded once reached. These can only be increased by leveling up and using BP to unlock the next level when used as shown on the following charts.

The amounts to unlock each level are the totals, but you have to have the level that comes before it. (i.e. to unlock Abnormal spell access, its purchasing Common access for 5BP + Uncommon access for 10BP + Abnormal access for 15BP = for a total of 30 BP)

Unarmed Die (UD)

Unarmed Die (UD) Build Point (BP) Unlock Requirement
1d4-
1d65
1d810
1d1015
1d1220

Spell Die (SD)

Spell Die (SD) Build Point (BP) Unlock Requirement
1d4-
1d65
1d810
1d1015
1d1220

Spell Access Level (SAL)

Spell Access Level (SAL) Build Point (BP) Unlock Requirement
Cantrip-
Common5
Uncommon10
Abnormal15
Rare20
Very Rare25

Level-less System

In a Level-less Campaign, players do not level up in order to increase their stats and abilities. The only way the stats of a Character can be increased is by attaining new equipment, training, and learning new skills and spells within the world itself. Spells and Feats must be learned by studying or being taught. Build Points are not used in a Level-less campaign and it is instead the VM’s responsibility to make Spells, Skills, and other stat altering methods available. The Schools of Combat and Schools of Magic are perfect locations for spell access and should be readily available in major locations.

Level Based Spells, Feats, and Abilities
Many spells, feats, and abilities use their Character’s level to calculate bonuses, spell duration, and other effects. In all such cases the Character’s Ability Score Average (ASA) is used instead. This score is calculated by adding all of the Character’s Ability Scores together and dividing by 6. For every ASA with an uneven score, the score is rounded up for every score over half. For example, if the ASA is 10.2 then the score is considered a 10 but if the ASA is 10.5 then the score is considered an 11.

Skills, Knowledge, & Training – Intuition Points
A Character’s Career will be paramount in advancing their Skill sets. Unless the VM provides a method to increase Skills alternatively, the only way to increase the Character’s Skills, Knowledge, and Training with Intuition Points. Each time a character uses a Skill or succeeds on a Skill Check they gain one Intuition Point. Once the Character has 10 Intuition Points in one Skill they gain a +1 bonus to it. Also, for each hour a Character spends studying a Knowledge through research either through computers or books, such as at a library, they gain 1 Intuition Point.

However, once an Intuition Point is gained from a single source, such as a specific book or scroll, then that source cannot be used to gain more Intuition Points and new sources must be used that provide new knowledge or information. Once they have 10 Intuition Points in one Knowledge they gain a +1 bonus to it. Finally, whenever a character naturally lands a Critical Hit on a creature with an Attack then they gain Intuition Points for that Training skill and once they have 10 Intuition Points in one Training then they gain a +1 bonus to it.

Ability Scores – Practice Points
In a Level-Less Campaign, the same is true for Ability Scores. Ability Scores can have Practice Points with are achieved with various DC checks dependent on the Ability Score. These DC checks can only be performed once a day for each Ability Score. Performing these checks require the Character to have at least one hour of dedicated time to perform and the Character is considered Distracted while doing so and cannot perform any other actions. If the character is interrupted during the hour then they automatically fail the DC.

Characters can increase their Strength through Exercise. In order to do so successfully, they must perform a Strength Check against an Exercise DC. For every Exercise DC the Character beats they gain one Practice Point in only Strength. Once the Character has 10 Practice Points in Strength, they gain a +1 Bonus to Strength. Using Exercise Equipment provides a temporary bonus (depending on the equipment) to their Strength only while performing a Strength Check against an Exercise DC. Equipment can either be purchased from shops or borrowed while at a Gym or Practice Facility. The Exercise DC is calculated using the following formula:

Exercise DC = Character’s Strength Score + 20

Characters can increase their Dexterity through Stretching. In order to do so successfully, they must perform a Dexterity Check against a Stretching DC. For every Stretching DC the Character beats they gain one Practice Point in only Dexterity. Once the Character has 10 Practice Points in Dexterity, they gain a +1 Bonus to Dexterity. Using Stretching Equipment provides a temporary bonus (depending on the equipment) to their Dexterity only while performing a Dexterity Check against a Stretch DC. Equipment can either be purchased from shops or borrowed while at a Stretch Hall or Practice Facility. The Stretch DC is calculated using the following formula:

Stretch DC = Character’s Dexterity Score + 20

Characters can increase their Constitution through Endurance. In order to do so successfully, they must perform a Constitution Check against an Endurance DC. For every Endurance DC the Character beats they gain one Practice Point in only Constitution. Once the Character has 10 Practice Points in Constitution, they gain a +1 Bonus to Constitution. Using Endurance Equipment provides a temporary bonus (depending on the equipment) to their Constitution only while performing a Constitution Check against an Endurance DC. Equipment can either be purchased from shops or borrowed while at an Endurance Stadium or Practice Facility. The Endurance DC is calculated using the following formula:

Endurance DC = Character’s Constitution Score + 20

Characters can increase their Sanity through Meditation. In order to do so successfully, they must perform a Sanity Check against a Meditation DC. For every Meditation DC the Character beats they gain one Practice Point in only Sanity. Once the Character has 10 Practice Points in Sanity, they gain a +1 Bonus to Sanity. Using Meditation Equipment provides a temporary bonus (depending on the equipment) to their Dexterity only while performing a Sanity Check against a Meditation DC. Equipment can either be purchased from shops or borrowed while at a Meditation Ground or Practice Facility. The Meditation DC is calculated using the following formula:

Meditation DC = Character’s Sanity Score + 20

Characters can increase their Intellect through Research. In order to do so successfully, they must perform an Intellect Check against a Research DC. For every Research DC the Character beats they gain one Practice Point in only Intellect. Once the Character has 10 Practice Points in Intellect, they gain a +1 Bonus to Intellect. Using Research Equipment provides a temporary bonus (depending on the equipment) to their Intellect only while performing an Intellect Check against a Research DC. Equipment can either be purchased from shops or borrowed while at a Research Lab or Practice Facility. The Research DC is calculated using the following formula:

Research DC = Character’s Intellect Score + 20

Characters can increase their Empathy through Introspection. In order to do so successfully, they must perform an Empathy Check against an Introspection DC. For every Introspection DC the Character beats they gain one Practice Point in only Empathy. Once the Character has 10 Practice Points in Empathy, they gain a +1 Bonus to Empathy. Using Introspection Equipment provides a temporary bonus (depending on the equipment) to their Empathy only while performing an Empathy Check against an Introspection DC. Equipment can either be purchased from shops or borrowed while at a Social Setting or Practice Facility. The Introspection DC is calculated using the following formula:

Introspection DC = Character’s Empathy Score + 20

Spells & Learning Spells
In order for a Character to learn a new spell they must Decipher a spell from an Instruction Manual. Characters can find Instruction Manuals for spells at Schools of Magic or in dungeons and temples at the VM’s discretion. They can be purchased or given to the Character from instructors. In order to properly learn the spell, they must make a Spell Craft Check against the Decipher Spell DC which is calculated with the formula:

Decipher Spell DC = 10 + Rarity Score

Each Spell has a Rarity Score which is based on their SAL and includes Cantrip +1, Common +5, Uncommon +10, Abnormal +20, Rare +25, and Very Rare +30. If the Character beats the Decipher Spell DC then they learn the spell and can add it to their list of known spells. If they fail, they must wait one day before they are able to attempt again for the same spell even if it is from a different source such as from an Instructor. Performing this check requires the Character to have at least one hour of dedicated time to perform and the Character is considered Distracted while doing so and cannot perform any other actions. If the character is interrupted during the hour then they automatically fail the DC.

The second way a Character can naturally learn a new spell is by having it taught to them from an Instructor. Any Character that knows the spell that is being taught and also has a Career that includes Knowledge (Arcana) is considered an Instructor. Such Characters can also create Instruction Manuals for the spell that can then be sold or used to teach others spells. The Instructor must perform a Wordsmith Check against the Learn Spell DC which is

Learn Spell DC = 10 + Rarity Score

If the Instructor does not pass this Check then the student cannot learn the spell regardless of their ability to learn as the Instructor did not provide adequate enough information. If they do succeed, then the Character attempting to learn the spell must make an Intellect Check against the same Learn Spell DC. If the Character fails the check then they do not learn the spell as they lack the ability to and they must wait one day before they are able to attempt again for the same spell even if it is from a different source such as from an Instruction Manual. If they succeed, then they can add the spell to their known spell list. Performing these checks require the Character and Instructor to have at least one hour of dedicated time to perform and the Characters are considered Distracted while doing so and cannot perform any other actions. If the character is interrupted during the hour then they automatically fail the DC.

If an Instructor wants to create an Instruction Manual then they must make a Scribe Check against the Learn Spell DC but they must also have materials to do so such as a blank book or parchment and writing utensils. It can only be written in a language known to the Instructor or alternatively can be written in Runes and in such a case is considered magical writing.

The third way in which a Character can learn a spell is by the Spell being transferred to them from a Magical Creature, Divine Being, or other magical means such as artifacts and magical tools. If the Character learns the spell in this way then they must make a Sanity Check against the Learn Spell DC. If they fails, then the character is not capable of comprehending the spell and they must wait one day before they are able to attempt again for the same spell even if it is from a different source such as from an Instruction Manual or Instructor. If they succeed, then they can add the spell to their known spell list. Learning a spell through this method is near instantaneous and performing the check is considered a Swift Action.

Feats & Learning Feats
Characters can learn new Feats from Instruction Manuals for Feats by making a Perform Check against the Learn Feat DC. The Character must know the prerequisite for the Feat otherwise they automatically fail the check. The Learn Feat DC is calculated as

Learn Feat DC = 10 +Feat Level

The Feat Level is based on what type of Feat it is such as Career Feat +1, General Feat +5, Combat Feat + 10, Companion Feat +15, and Archetype Feat + 20. If successful, the Player adds the Feat to their Known Feats. If they fail, they must wait one day before they are able to attempt again for the same feat even if it is from a different source such as from an Instructor. Performing this check requires the Character to have at least one hour of dedicated time to perform and the Character is considered Distracted while doing so and cannot perform any other actions. If the character is interrupted during the hour then they automatically fail the DC.

Another way a Character can naturally learn a new feat is by having it taught to them from an Instructor. Any Character that knows the feat that is being taught and also has a Career that includes Knowledge (Science) is considered an Instructor. Such Characters can also create Instruction Manuals for the feat that can then be sold or used to teach others feats. The Instructor must perform a Wordsmith Check against the Learn Feat DC which is

Learn Feat DC = 10 + Feat Level

If the Instructor does not pass this Check then the student cannot learn the feat regardless of their ability to learn as the Instructor did not provide adequate enough information. If they do succeed, then the Character attempting to learn the feat must make an Intellect Check against the same Learn Feat DC. If the Character fails the check then they do not learn the feat as they lack the ability to and they must wait one day before they are able to attempt again for the same feat even if it is from a different source such as from an Instruction Manual. If they succeed, then they can add the feat to their known spell list. Performing these checks require the Character and Instructor to have at least one hour of dedicated time to perform and the Characters are considered Distracted while doing so and cannot perform any other actions. If the character is interrupted during the hour then they automatically fail the DC.

If an Instructor wants to create an Instruction Manual then they must make a Scribe Check against the Learn Feat DC but they must also have materials to do so such as a blank book or parchment and writing utensils. It can only be written in a language known to the Instructor or alternatively can be written in Runes and in such a case is considered magical writing.

Unarmed Die & Spell Die – PAS & MAS
All Characters starts off with an Unarmed Die (UD) of 1d4 and a Spell Die (SD) of 1d4. This increases based on the Character’s Ability Scores. The Unarmed Die is based on the average score of the Character’s Physical Ability Scores (PAS) while the Spell Die is based on the average score of the Character’s Mental Ability Scores (MAS).

The PAS is calculated by finding the average of the Strength, Constitution, and Dexterity Ability Scores which is found by adding all three together and dividing by 3. The score rounds up if the score is over half. For example, if the PAS is 10.4 then it rounds to 10 but if the PAS is 10.5 then it rounds up to 11. The MAS is calculated by finding the average of the Intellect, Sanity, and Empathy Ability Scores which is found by adding all three together and dividing by 3. The score rounds up if the score is over half. For example, if the MAS is 10.4 then it rounds to 10 but if the PAS is 10.5 then it rounds up to 11. These scores then determine the UD and SD.

The scores increase as following for PAS: The Character’s UD starts off at 1d4. At a PAS of 15 the UD is 1d6, at a PAS of 20 the UD is 1d8, at a PAS of 25 the UD is 1d10, at a PAS of 30 the UD maxes at 1d12.

The scores increase as following for MAS: The Character’s SD starts off at 1d4. At a MAS of 15 the SD is 1d6, at a MAS of 20 the SD is 1d8, at a MAS of 25 the SD is 1d10, at a MAS of 30 the SD maxes at 1d12.